MadgeTech Event101 Event Data Logger

Sorry, this product is discontinued and is no longer available for purchase. Please call 1-877-766-5412 to find a suitable replacement.

The MadgeTech Event101 Event Data Logger records time and date stamped data point when an event or momentary, closed contact occurs.  When an event occurs on the input of the Event101, the date and time is recorded at the end of the reading interval.  A common application for an event recorder is monitoring tipping bucket rain gauges.  The event recorder will record the time when the bucket tips and the contact is
closed, indicating a certain amount of rainfall.

Can be used with dry contact relay switches or analog voltage input signals from external devices (i.e. event initiators, pulse output transducers, totalizers, counters, etc.) 

User-programmable Engineering Units. Screw terminal input.

Reminder: An IFC cable is required for operation of data loggers!

The Good:

The Bad:

The Bottom Line:

Full Review


Input Range:
0~12VDC continuous (0~30 VDC peak)
Input Low:
Input High:
Internal Weak Pull-Up:
Recommended Duty Cycle for Inputs Greater than 12VDC (over 1 minute interval):
18V:<50%, 24V:<25%, 30V:<10%
Sample Rate:
1 second up to 12 hours
Minimum Time Resolution:
1 second
Minimum Input Active (Low) Time:
1 millisecond
13,107 events
LED Indicator:
Required Interface Package:
Baud Rate:
Typical Battery Life:
1 year
Operating Environment:
-40~+80°C, 0~95%RH non-condensing
ABS plastic
1.4" x 2.5" x 0.6" (36mm x 64mm x 16mm)
CE Approval:
No user reviews available.
Recommended Accessories

Have a Question?

Do you have a question for us? Can't find what you're looking for? We're glad to help you. Fill out the simple form below and we'll get back to you as soon as possible.

In order to prevent spam through the form, please enter the passcode word displayed below. If you cannot read the word clearly, you can change the passcode image.

Enter Passcode: