Home » MadgeTech QuadProcess Current Data Logger
MadgeTech QuadProcess Current Data Logger
The MadgeTech QuadProcess Current Data Logger is a 4 - channel,
battery-powered, stand alone current recorder. This is an all-in-one
compact, portable, easy to use device that will measure and record up
to 32,767 measurements per channel.
Records time and date stamped DC current data from external sensors, transducers and many other sources. Features user-programmable Engineering Units and offset/gain calculations so input signals can be scaled to proper units being measured. For example, a water meter with a 4-20mA output can be displayed as liters or gallons, etc.., in the software graph and data. Negative current signals can be monitored and recorded, for a broad range of applications.
Three different DC current ranges are available. 4 Channels. Screw terminal inputs.
Records time and date stamped DC current data from external sensors, transducers and many other sources. Features user-programmable Engineering Units and offset/gain calculations so input signals can be scaled to proper units being measured. For example, a water meter with a 4-20mA output can be displayed as liters or gallons, etc.., in the software graph and data. Negative current signals can be monitored and recorded, for a broad range of applications.
Three different DC current ranges are available. 4 Channels. Screw terminal inputs.
Reminder: An IFC cable is required for operation of data loggers!
APPLICATIONS:
- 4 to 20 mA recording
- pH recording
- Low level signal monitoring
- Photovoltaic studies
- Battery studies
- Biological sensor monitoring
- Factory process control
- Research and development
- Medical and Pharmaceutical
- Environmental studies
The Good:
The Bad:
The Bottom Line:
The Bad:
The Bottom Line:
Full Review
- 16-bit readings provide high resolution
- User-defined engineering units
- Programmable start time and recording interval
- Low cost
- Real-time operation
- Reusable
- Compact
- User-friendly
- CE compliant
Nominal Range ±1mA ±25mA ±100mA
Measurement Range ±1.5mA ±30mA ±120mA
Input Range 0 to 2.5V 0 to 2.5V 0 to 2.5V
Resolution 0.05μA 1μA 5μA
Calibrated Accuracy
@25°C ±0.5%FSR @ 25°C ±0.1%FSR @ 25°C ±0.1%FSR @ 25°C
Input Impedence 50Ω 10Ω 2Ω
Measurement Range ±1.5mA ±30mA ±120mA
Input Range 0 to 2.5V 0 to 2.5V 0 to 2.5V
Resolution 0.05μA 1μA 5μA
Calibrated Accuracy
@25°C ±0.5%FSR @ 25°C ±0.1%FSR @ 25°C ±0.1%FSR @ 25°C
Input Impedence 50Ω 10Ω 2Ω
|
Channels:
|
4
|
|||||||||
|
Memory:
|
32,767 readings per channel
|
|||||||||
|
Sample Rate:
|
1 second up to 12 hours
|
|||||||||
|
LED Indicator:
|
None
|
|||||||||
|
Required Interface Package:
|
IFC110
|
|||||||||
|
Baud Rate:
|
2,400
|
|||||||||
|
Typical Battery Life:
|
1 year
|
|||||||||
|
Operating Environment:
|
-20~+60°C, 0~95%RH non-condensing
|
|||||||||
|
Material:
|
Anodized aluminum
|
|||||||||
|
Dimensions:
|
3.5" x 4.4" x 1.0" (89mm x 112mm x 26mm)
|
|||||||||
|
CE Approval:
|
Yes
|
|||||||||
|
Weight:
|
17oz.
|
|||||||||
Product brochures
No user reviews available.
