Home » MadgeTech Bridge110 Strain Data Logger
MadgeTech Bridge110 Strain Data Logger
The MadgeTech Bridge110 Strain Data Logger records time and date stamped DC voltage data. Accepts voltage signals from strain gauges, load cells and other low-level, DC voltage sources. Perfect for monitoring stress, torque, strain, pressure conditions and data from many other sensors/transducers.
User-programmable Engineering Units and offset/gain calculations allows data to be presented in Volts, milliVolts, microVolts as well as the proper units being measured.
Four voltage ranges are available. (±10mV, ±25mV, ±100mV and ±1000mV) Single channel, screw terminal input.
Reminder: An IFC cable is required for operation of data loggers!
APPLICATIONS:
User-programmable Engineering Units and offset/gain calculations allows data to be presented in Volts, milliVolts, microVolts as well as the proper units being measured.
Four voltage ranges are available. (±10mV, ±25mV, ±100mV and ±1000mV) Single channel, screw terminal input.
Reminder: An IFC cable is required for operation of data loggers!
APPLICATIONS:
- Strain gauge
- Load cells
- Pressure transducers
- Torque sensors
- Load bolts
- Position transducers
- Replace costly strip chart recorders
The Good:
The Bad:
The Bottom Line:
The Bad:
The Bottom Line:
Full Review
- 10 year battery life
- High speed download
- Low cost
- Programmable start time
- Reusable
- Miniature size
- User-friendly
- Reads in microstrain and engineering units
- Versatile inputs for many applications
Nominal Range ±10mV ±25mV ±100mV ±1000mV
Measurement Range ±15mV ±37.5mV ±120mA ±1200mA
Resolution 1μV 2.5μV 5μV 50μV
Calibrated Accuracy
@25°C ±0.25%FSR ±0.10%FSR ±0.05%FSR ±0.01%FSR
Input Range 0 to 2.5V 0 to 2.5V 0 to 2.5V 0 to 2.5V
Refrence Voltage 2.5V 2.5V 2.5V 2.5V
|
Memory:
|
32,767
|
|||||||||
|
Sample Rate:
|
1 second up to 12 hours
|
|||||||||
|
Units:
|
V, mV, μV, engineering units specified through software
|
|||||||||
|
Required Interface Package:
|
IFC110
|
|||||||||
|
Baud Rate:
|
57,600
|
|||||||||
|
Typical Battery Life:
|
10 years
|
|||||||||
|
Operating Environment:
|
-40~+80°C, 0~95%RH non-condensing
|
|||||||||
|
Material:
|
ABS plastic
|
|||||||||
|
Dimensions:
|
1.7" x 2.7" x 0.8" (44mm x 69mm x 21mm)
|
|||||||||
|
CE Approval:
|
Yes
|
|||||||||
|
Weight:
|
2oz.
|
|||||||||
Product brochures
Popularity: 24.60%
Customer Ratings: 
3.0 of 5 (1 reviews)
3.0 of 5 (1 reviews)
Recommended: YES: 1 | NO: 0
works with Loadcells
T squared RECOMMENDS THIS PRODUCT
January 27, 2010
The Good:
compact standalone datalogger, great customer support for my application.
The Bad:
low exctiation for loadcell operation
The Bottom Line:
just what I needed for long term monitoring in remote location no power required
compact standalone datalogger, great customer support for my application.
The Bad:
low exctiation for loadcell operation
The Bottom Line:
just what I needed for long term monitoring in remote location no power required
