Home » Pressure » AEMC L215 AC Voltage Exception Logger
AEMC L215 AC Voltage Exception Logger
Part Number:
AEMC L215
In Stock?
Stock may be available
please call (877)766-5412 to confirm
please call (877)766-5412 to confirm
Quantity
Price:
$349.00 
USD (change)
USD (change) 
The AC Exception Voltage Simple Logger® Model L215 is the ideal product to capture short-term events such as sags and swells. This logger samples the input 10 times per second and only stores the data when an alarm threshold is crossed, thus maximizing its use of memory. The 65,000-point storage capacity provides enough memory to store more than 1000 events. The Model L215 is powered by the AC voltage signal it is monitoring and incorporates a backup battery to provide up to one year of additional operation and data storage protection.
The Simple Logger includes a Windows based software package that can plot, analyze recorded data and print graphs and data listings.
Simple Logger operates in three modes: Logging, Standby, and off. A red LED indicates the mode of operation. In the Logging mode, the logger records information in memory; in the Standby mode, it retains the recorded information for transfer to a computer; in the Off mode, the memory is cleared. However, if the Simple Logger is turned off by mistake, the cleared data can be easily recovered.
The main advantage of the Simple Logger is its ability to perform a wide variety of recording tasks with high resolution and accuracy without the need for user setup. It achieves this my means of automatic scaling and Time Extension Recording (TXR) along with a flexible input design.
Simple Logger is the easiest to use tool built to record data on-site and download it onto your computer for analysis. For the user who is monitoring a machine load or voltage line, trouble shooting HVAC, profiling a process loop or monitoring temperature, it's the perfect tool to give you the information you need, when you need it. Simply connect the logger to the signal to be recorded and press the button to begin recording. When the session is complete press the button to stop.
The Simple Logger includes a Windows based software package that can plot, analyze recorded data and print graphs and data listings.
Simple Logger operates in three modes: Logging, Standby, and off. A red LED indicates the mode of operation. In the Logging mode, the logger records information in memory; in the Standby mode, it retains the recorded information for transfer to a computer; in the Off mode, the memory is cleared. However, if the Simple Logger is turned off by mistake, the cleared data can be easily recovered.
The main advantage of the Simple Logger is its ability to perform a wide variety of recording tasks with high resolution and accuracy without the need for user setup. It achieves this my means of automatic scaling and Time Extension Recording (TXR) along with a flexible input design.
Simple Logger is the easiest to use tool built to record data on-site and download it onto your computer for analysis. For the user who is monitoring a machine load or voltage line, trouble shooting HVAC, profiling a process loop or monitoring temperature, it's the perfect tool to give you the information you need, when you need it. Simply connect the logger to the signal to be recorded and press the button to begin recording. When the session is complete press the button to stop.
The Good:
The Bad:
The Bottom Line:
The Bad:
The Bottom Line:
Full Review
Features
0 to 250Vrms 10 samples per second Stores data when alarm level is tripped True RMS measurements 64K storage memory 10 bit resolution (250mV) Detect sags and swells Scale automatically selected by software Software programmable HI and LO alarm levels Alarm trip LED indicator
ApplicationsSurge/sag monitoring Computer room monitoring Residential monitoring Machine monitoring Marine power monitoring
Applications
- Number Of Channels: 1
- Measurement Range: 0 to 250Vrms
- Input Connections: Recessed safety banana jacks
- Resolution: 10 bit, 250mV max
- Accuracy: 1% of Reading +250mV
- Sample Rate: 36,000/hr (10 samples/sec)
- Data Storage: Approximately 65, 536 readings
- Data Storage Technique: Exception recording in FIFO mode; 60 samples stored when alarm is tripped. Each 60 sample recording is considered to be a packet. When memory is full, data will be overwritten one packet at a time beginning with the oldest.
- Power Source: AC powered with 9V Alkaline battery backup
- Battery Life: Up to 1 yr of recording @ 25° C
- Output: RS-232 via DB9 connector (@4800 baud)
- Indicators: Red LED double flashes in LOGGING, single flashes in STANDBY and is off in OFF mode. Amber LED flashes once every 2 seconds when alarm level has been tripped. Amber light can only be reset by stopping the recording and downloading the data.
- Controls: One button used to start and stop recording sessions and to turn the data logger on and off
Simple Logger® Software
Simple Logger® Software has the ability to plot graphs and view statistics quickly and easily when you download data from Simple Logger® to your computer. Scale and time axis update automatically.
With Simple Logger® Software, click and drag your mouse to zoom up the desired area of the graph for better viewing. The Min, Max and Average statistics at the bottom of the graph update automatically with zoom window.
Just click the Annotate button to add a title and descriptive information to your graph. This information can be stored and printed with a graph.
Features:
Simple Logger® Software has the ability to plot graphs and view statistics quickly and easily when you download data from Simple Logger® to your computer. Scale and time axis update automatically.
With Simple Logger® Software, click and drag your mouse to zoom up the desired area of the graph for better viewing. The Min, Max and Average statistics at the bottom of the graph update automatically with zoom window.
Just click the Annotate button to add a title and descriptive information to your graph. This information can be stored and printed with a graph.
Features:
- Very easy to set up and use - no programming required
- Statistics appear on screen: Max, Min, Avg, Date and Time
- On-line display of data logger values
- Zoom capability with automatic statistics update
- User keyed text annotations
- Automatically displays values at the cursor position
- Export dat to spreadshet and database software
- Print both graphs and tabular listings
- Paste graphs into other applications
- Programmable scale and units for all DC loggers. Automatic selection for AC loggers
- Automatic baud rate selection
- 386 or higher
- 4 MB of RAM
- Windows 3.1, Windows 95 or Windows 98
- 1 serial port not in use by any other device
- 100kB hard drive space for program and 200kB max per file stored
No user reviews available.
