Home » AEMC L230 AC Voltage Logger
AEMC L230 AC Voltage Logger
The L230 single channel stray voltage logger with a range of 0 - 300 Vrms takes a true RMS measurement using color-coded safety banana jacks. One button operation provides ease-of-use with an accuracy of +/-1% of reading. This simple logger is a low cost data logger that requires no user setup. It has the ability to automatically adjust both its scale range and its sample rate to optimize the recording session.
Logger comes complete with software, RS232 cable, 9V Alkaline battery, 5ft lead set and user manual
The Simple Logger® includes a Windows
based software package that can plot, analyze recorded data and print
graphs and data listings.
Simple Logger® operates in three modes: Logging, Standby, and off. A
red LED indicates the mode of operation. In the Logging mode, the
logger records information in memory; in the Standby mode, it retains
the recorded information for transfer to a computer; in the Off mode,
the memory is cleared. However, if the Simple Logger is turned off by
mistake, the cleared data can be easily recovered.
The main
advantage of the Simple Logger® is its ability to perform a wide variety
of recording tasks with high resolution and accuracy without the need
for user setup. It achieves this my means of automatic scaling and
Time Extension Recording (TXR) along with a flexible input design.
Simple
Logger® is the easiest to use tool built to record data on-site and
download it onto your computer for analysis. For the user who is
monitoring a machine load or voltage line, trouble shooting HVAC,
profiling a process loop or monitoring temperature, it's the perfect
tool to give you the information you need, when you need it. Simply
connect the logger to the signal to be recorded and press the button to
begin recording. When the session is complete press the button to
stop.
The Bad:
The Bottom Line:
Full Review
Applications |
Number of Channels: 1
Measurement Range: 0 to 300Vrms
Input Connection: Recessed Safety Banana Jacks
Resolution: 8 Bit max 250mV
Accuracy: 1% of Reading + Resolution
Sample Rate: 4096/hr max, decreases by 50% each time memory is full
Storage Technique: Time Extension Recording
Data Storage: 8192 readings
Power: 9V Alkaline battery
Battery Life: Up to 1 yr of recording @ 25°C
Output: RS232 via DB9 connector
Indicators: Red LED double flashes in Logging, single flashes in standby, and is off in Off mode.
Controls: One button used to start and stop recording sessions and to turn the data logger on and off.
Mechanical
Size: 2-7/8 x 2-5/16 x 1-5/8" (73 x 59 x 41mm)
Weight: (with battery) 5 oz (140 g)
Mounting: Base plate mounting holes or Velcro pads
Environmental
Operating Temperature: -4 to 158° F (-20 to +70°C)
Storage Temperature: -40 to +174°F (-40 to +80°C)
Relative Hudmidity: 5 to 95% non-condensing
Simple Logger® Software has the ability to plot graphs and view statistics quickly and easily when you download data from Simple Logger® to your computer. Scale and time axis update automatically.
With Simple Logger® Software, click and drag your mouse to zoom up the desired area of the graph for better viewing. The Min, Max and Average statistics at the bottom of the graph update automatically with zoom window.
Just click the Annotate button to add a title and descriptive information to your graph. This information can be stored and printed with a graph.
Features:
- Very easy to set up and use - no programming required
- Statistics appear on screen: Max, Min, Avg, Date and Time
- On-line display of data logger values
- Zoom capability with automatic statistics update
- User keyed text annotations
- Automatically displays values at the cursor position
- Export dat to spreadshet and database software
- Print both graphs and tabular listings
- Paste graphs into other applications
- Programmable scale and units for all DC loggers. Automatic selection for AC loggers
- Automatic baud rate selection
- 386 or higher
- 4 MB of RAM
- Windows 3.1, Windows 95 or Windows 98
- 1 serial port not in use by any other device
- 100kB hard drive space for program and 200kB max per file stored
