Home » MadgeTech EGMS Egg Temperature and Humidity Monitoring System
MadgeTech EGMS Egg Temperature and Humidity Monitoring System
- Submersible
Part Number:
MT EGMS
In Stock?
Stock may be available
please call (877)766-5412 to confirm
please call (877)766-5412 to confirm
Quantity
Price:
$199.00 
USD (change)
USD (change) 
MadgeTech EGMS is specifically designed to measure and record the
temperature and humidity of eggs during shipping, storage and
incubation. The logger thermally responds to an environment the same way
a real egg does, simulating the temperature and humidity experience of
the actual product.
The EGMS comes with a humidity and temperature cap, and a temperature only cap. The temperature and humidity cap has vents to measure the humidity, where as the temperature only cap doesnt have any vents, and makes the product submersible. The EGMS can measure temperatures up to 50°C. It has a user replaceable battery, that typically lasts up to 1 year. The nonvolatile memory can hold up to 32,767 readings and will retain data even if the battery becomes discharged.
MadgeTechs data logger software offers an easy way to analyze data. Data can be viewed in Celsius or Fahrenheit, and in graph, summary or data formats. For further analysis data can also be exported to Excel.
Applications:
The EGMS comes with a humidity and temperature cap, and a temperature only cap. The temperature and humidity cap has vents to measure the humidity, where as the temperature only cap doesnt have any vents, and makes the product submersible. The EGMS can measure temperatures up to 50°C. It has a user replaceable battery, that typically lasts up to 1 year. The nonvolatile memory can hold up to 32,767 readings and will retain data even if the battery becomes discharged.
MadgeTechs data logger software offers an easy way to analyze data. Data can be viewed in Celsius or Fahrenheit, and in graph, summary or data formats. For further analysis data can also be exported to Excel.
Applications:
- Egg shipment
- Egg storage
- Hatcheries
The Good:
The Bad:
The Bottom Line:
The Bad:
The Bottom Line:
Full Review
- Reusable
- Submersible (with temperature only cap)
- Temperature and Humidity
- Monitoring
- Programmable start time
- User-friendly
- Low cost
- 0 to 60ºC temperature rangen and 0 to 95% humidity
- ±0.5ºC and ±3.0%RH accuracy
- 0.1ºC and 0.5%RH resolution
| Temperature Sensor | Semiconductor |
| Temperature Range | 0 to +60ºC |
| Temperature Resolution | 0.1ºC |
| Calibrated Accuracy | ±0.5ºC |
| Humidity Sensor | Semiconductor |
| Humidity Range | 0 to 95%RH |
| Humidity Resolution | 0.5%RH |
| Calibrated Accuracy | ±3.0%RH (±2.0%RH typical @ 25ºC) |
| Specified Accuracy Range | +10 to +40°C, 10 to 80%RH |
| Response Time | 90% change in 60 seconds in slow moving air |
| Calibration | Digital calibration through software. |
| Start Modes | Software programmable immediate start or delay start up to six months in advance |
| Real Time Recording | May be used with PC to monitor and record data in real time. |
| Memory | 16,383 readings per channel; 32,766 total readings |
| Reading Rate | 1 reading every 2 seconds to 1 every 12 hours |
| Time Accuracy | ±1 minute/month at 20ºC |
| Data Format | Date and time stamped ºC, ºF, K, ºR; %RH, mg/ml water vapor concentration |
| Battery Type | 2 - 1.55V SR1154W batteries included; user replaceable |
| Battery Life | 1 year typical (15 minute reading rate, 25ºC) |
| Activity Indicator | Green LED blinks every 15 seconds to indicate device has been started |
| Temperature Alarm | Programmable temperature alarm with high and low limits selectable in software; when logged data reaches or exceeds either limit, the red LED blinks every three seconds |
| Computer Interface | PC serial or USB (interface cable required); 38,400 baud |
| Software | Windows 95/98/ME/NT/2000/XP/Vista based software |
| Operating Environment | 0 to +60ºC, 0 to 95%RH non-condensing. Product is submersible with temperature cap |
| Dimensions | 2.25" x 1.68" dia. (57.15mm x 42.67mm dia.) |
| Weight | 2.02oz (60g) |
| Material | Enclosure: HDPE, Logger: 303 Stainless Steel |
| Approvals | CE Compliant |
* BATTERY WARNING: Risk of fire and burns. Do not recharge, short, disassemble, heat above 100ºC or incinerate.
MadgeTech
Data Recorder Software displays temperature data in an easy to
use graph. The Windows®-based software package allows the user to
effortlessly collect, display and analyze data. A variety of powerful
tools allow you to examine, export, and print professional looking data
with just a click of the mouse. Software Features:
Multiple Graphs: Simultaneously analyze data from several units or deployments easily switch to a single data series.
Real-Time Recording: Collect and display data in real-time.
Graphical Cursor: One click displays readings by time, value, parameter or sample number
Data Table: Instantly access tabular view for detailed dates, times, values, and annotations
Scaling Options: Autoscale function fits data to the screen, or allows user to manually enter their own values
Formatting Options: Change colors, line styles, plotting options, show or hide channels quickly
Statistics: Calculate averages, min, max, standard deviation, and mean kinetic temperature with the touch of a button
Export Data: Export data in a variety of common formats, or switch to Excel with a single click
Calibration: Automatically calculate and store calibration parameters
Logger Configuration: Easy set up and launch of data loggers with immediate or delayed start, preferred sample rate, and device ID
Communications: Automatically sets up communications port, or lets user select configuration
Printing: Automatically print graphical or tabular data
Product brochures
Product manuals
No user reviews available.
